Now using the Edit path by nodes tool (F2), select one of the letters you want a bridge in and the rectangle you just made. 08″ Aluminum, for example, you’ll want your bridge and line sizes to be. You’ll want your bridges to be at least 50% as wide as the thickness of the material you are cutting from. Something to keep in mind as you create bridges for your text is the minimum part size for laser cutting. In this example with the SendCutSend logo, we’ll place them at the bottom of the Ds. Draw a rectangle using the Rectangle tool (F4) where you want your bridge to be. This will snap your rectangle to the edges of your letters. Before you start, make sure you Enable Snapping (%). We’ll go over one method using the Boolean Operations in your Path menu. You can remedy this by creating links or bridges to those areas. However, if you want to reverse cut your type, you are going to lose the holes in your letters (O, P, B, A, etc.). If you were going to cut each letter individually, what you have here would be ready to go. Creating bridges for reversed laser cut text Easy! At this point, you should also see vector points or nodes around the edges of your letters. Now your text is a group of vector shapes.

You’re going to select all your text, go to the Path Menu, and click Object to Path or press CTRL+Shift+C. We’re going to teach you how to convert type to vector shapes and create bridges for reversed text so your text will come off the laser looking as awesome as you imagined it. SIs laser cut text tripping you up? No worries. In this tutorial we’ll show you how to prepare your text for laser cutting in Inkscape.

Scaling text on path inkscape